Systems engineering Escherichia coli for efficient production p-coumaric acid from glucose.

P-coumaric acid (p-CA), a pant metabolite with antioxidant and anti-inflammatory activity, is extensively utilized in biomedicine, food, and cosmetics industry. In this study, a synthetic pathway (PAL) for p-CA was designed, integrating three enzymes (AtPAL2, AtC4H, AtATR2) into a higher l-phenylalanine-producing strain Escherichia coli PHE05. However, the lower soluble expression and activity of AtC4H in the PAL pathway was a bottleneck for increasing p-CA titers. To overcome this limitation, the soluble expression of AtC4H was enhanced through N-terminal modifications. And an optimal mutant, AtC4HL373T/G211H, which exhibited a 4.3-fold higher kcat/Km value compared to the wild type, was developed. In addition, metabolic engineering strategies were employed to increase the intracellular NADPH pool. Overexpression of ppnk in engineered E. coli PHCA20 led to a 13.9-folds, 1.3-folds, and 29.1% in NADPH content, the NADPH/NADP+ ratio and p-CA titer, respectively. These optimizations significantly enhance p-CA production, in a 5-L fermenter using fed-batch fermentation, the p-CA titer, yield and productivity of engineered strain E. coli PHCA20 were 3.09 g/L, 20.01 mg/g glucose, and 49.05 mg/L/h, respectively. The results presented here provide a novel way to efficiently produce the plant metabolites using an industrial strain.

Rational design improves both thermostability and activity of a new D-tagatose 3-epimerase from Kroppenstedtia eburnean to produce D-allulose.

D-allulose is a naturally occurring rare sugar and beneficial to human health. However, the efficient biosynthesis of D-allulose remains a challenge. Here, we mined a new D-tagatose 3-epimerase from Kroppenstedtia eburnean (KeDt3e) with high catalytic efficiency. Initially, crucial factors contributing to the low conversion of KeDt3e were identified through crystal structure analysis, density functional theory calculations (DFT), and molecular dynamics (MD) simulations. Subsequently, based on the mechanism, combining restructuring the flexible region, proline substitution based onconsensus sequence analysis, introducing disulfide bonds, and grafting properties, and reshaping the active center, the optimal mutant M5 of KeDt3e was obtained with enhanced thermostability and activity. The optimal mutant M5 exhibited an enzyme activity of 130.8 U/mg, representing a 1.2-fold increase; Tm value increased from 52.7 °C to 71.2 °C; and half-life at 55 °C extended to 273.7 min, representing a 58.2-fold improvement, and the detailed mechanism of performance improvement was analyzed. Finally, by screening the ribosome-binding site (RBS) of the optimal mutant M5 recombinant bacterium (G01), the engineered strain G08 with higher expression levels was obtained. The engineered strain G08 catalyzed 500 g/L D-fructose to produce 172.4 g/L D-allulose, with a conversion of 34.4% in 0.5 h and productivity of 344.8 g/L/h on a 1 L scale. This study presents a promising approach for industrial-scale production of D-allulose.

Rational Design of Salmonella typhi Acid Phosphatase for Efficient Production of Pyridoxal 5'-Phosphate.

Pyridoxal 5'-phosphate (PLP) is highly valuable in food and medicine. However, achieving the efficient biosynthesis of PLP remains challenging. Here, a salvage pathway using acid phosphatase from Salmonella typhi (StAPase) and pyridoxine oxidase from Escherichia coli (EcPNPO) as pathway enzymes was established for the first time to synthesize PLP from pyridoxine (PN) and pyrophosphate (PPi). StAPase was identified as a rate-limiting enzyme. Two protein modification strategies were developed based on the PN phosphorylation mechanism: (1) improving the binding of PN into StAPase and (2) enhancing the hydrophobicity of StAPase's substrate binding pocket. The kcat/Km of optimal mutant M7 was 4.9 times higher than that of the wild type. The detailed mechanism of performance improvement was analyzed. Under the catalysis of M7 and EcPNPO, a PLP high-yielding strain of 14.5 ± 0.55 g/L was engineered with a productivity of 1.0 ± 0.02 g/(L h) (the highest to date). The study suggests a promising method for industrial-scale PLP production.

Reprogramming the Transition States to Enhance C-N Cleavage Efficiency of Rhodococcus opacusl-Amino Acid Oxidase.

l-Amino acid oxidase (LAAO) is an important biocatalyst used for synthesizing α-keto acids. LAAO from Rhodococcus opacus (RoLAAO) has a broad substrate spectrum; however, its low total turnover number limits its industrial use. To overcome this, we aimed to employ crystal structure-guided density functional theory calculations and molecular dynamic simulations to investigate the catalytic mechanism. Two key steps were identified: S → [TS1] in step 1 and Int1 → [TS2] in step 2. We reprogrammed the transition states [TS1] and [TS2] to reduce the identified energy barrier and obtain a RoLAAO variant capable of catalyzing 19 kinds of l-amino acids to the corresponding high-value α-keto acids with a high total turnover number, yield (≥95.1 g/L), conversion rate (≥95%), and space-time yields ≥142.7 g/L/d in 12-24 h, in a 5 L reactor. Our results indicated the promising potential of the developed RoLAAO variant for use in the industrial production of α-keto acids while providing a potential catalytic-mechanism-guided protein design strategy to achieve the desired physical and catalytic properties of enzymes.

Chemoenzymatic Installation of Site-Specific Chemical Groups on DNA Enhances the Catalytic Activity.

Functional DNAs are valuable molecular tools in chemical biology and analytical chemistry but suffer from low activities due to their limited chemical functionalities. Here, we present a chemoenzymatic method for site-specific installation of diverse functional groups on DNA, and showcase the application of this method to enhance the catalytic activity of a DNA catalyst. Through chemoenzymatic introduction of distinct chemical groups, such as hydroxyl, carboxyl, and benzyl, at specific positions, we achieve significant enhancements in the catalytic activity of the RNA-cleaving deoxyribozyme 10-23. A single carboxyl modification results in a 100-fold increase, while dual modifications (carboxyl and benzyl) yield an approximately 700-fold increase in activity when an RNA cleavage reaction is catalyzed on a DNA-RNA chimeric substrate. The resulting dually modified DNA catalyst, CaBn, exhibits a kobs of 3.76 min-1 in the presence of 1 mM Mg2+ and can be employed for fluorescent imaging of intracellular magnesium ions. Molecular dynamics simulations reveal the superior capability of CaBn to recruit magnesium ions to metal-ion-binding site 2 and adopt a catalytically competent conformation. Our work provides a broadly accessible strategy for DNA functionalization with diverse chemical modifications, and CaBn offers a highly active DNA catalyst with immense potential in chemistry and biotechnology.

Systems engineering of Escherichia coli for high-level glutarate production from glucose.

Glutarate is a key monomer in polyester and polyamide production. The low efficiency of the current biosynthetic pathways hampers its production by microbial cell factories. Herein, through metabolic simulation, a lysine-overproducing E. coli strain Lys5 is engineered, achieving titer, yield, and productivity of 195.9 g/L, 0.67 g/g glucose, and 5.4 g/L·h, respectively. Subsequently, the pathway involving aromatic aldehyde synthase, monoamine oxidase, and aldehyde dehydrogenase (AMA pathway) is introduced into E. coli Lys5 to produce glutarate from glucose. To enhance the pathway's efficiency, rational mutagenesis on the aldehyde dehydrogenase is performed, resulting in the development of variant Mu5 with a 50-fold increase in catalytic efficiency. Finally, a glutarate tolerance gene cbpA is identified and genomically overexpressed to enhance glutarate productivity. With enzyme expression optimization, the glutarate titer, yield, and productivity of E. coli AMA06 reach 88.4 g/L, 0.42 g/g glucose, and 1.8 g/L·h, respectively. These findings hold implications for improving glutarate biosynthesis efficiency in microbial cell factories.

Efficient production of protocatechuic acid using systems engineering of Escherichia coli.

Protocatechuic acid (3, 4-dihydroxybenzoic acid, PCA) is widely used in the pharmaceuticals, health food, and cosmetics industries owing to its diverse biological activities. However, the inhibition of 3-dehydroshikimate dehydratase (AroZ) by PCA and its toxicity to cells limit the efficient production of PCA in Escherichia coli. In this study, a high-level strain of 3-dehydroshikimate, E. coli DHS01, was developed by blocking the carbon flow from the shikimate-overproducing strain E. coli SA09. Additionally, the PCA biosynthetic pathway was established in DHS01 by introducing the high-activity ApAroZ. Subsequently, the protein structure and catalytic mechanism of 3-dehydroshikimate dehydratase from Acinetobacter pittii PHEA-2 (ApAroZ) were clarified. The variant ApAroZR363A, achieved by modulating the conformational dynamics of ApAroZ, effectively relieved product inhibition. Additionally, the tolerance of the strain E. coli PCA04 to PCA was enhanced by adaptive laboratory evolution, and a biosensor-assisted high-throughput screening method was designed and implemented to expedite the identification of high-performance PCA-producing strains. Finally, in a 5 L bioreactor, the final strain PCA05 achieved the highest PCA titer of 46.65 g/L, a yield of 0.23 g/g, and a productivity of 1.46 g/L/h for PCA synthesis from glucose using normal fed-batch fermentation. The strategies described herein serve as valuable guidelines for the production of other high-value and toxic products.

The association between methylmalonic acid, a biomarker of mitochondrial dysfunction, and risk of prostate cancer.

BACKGROUND: The aim of the study was to investigate the association between methylmalonic acid (MMA), a biomarker of mitochondrial dysfunction, and the risk of prostate cancer (PCa). METHODS AND MATERIALS: The relevant data were collected from the National Health and Nutrition Examination Survey (NHANES). Weighted univariable and multivariable logistic regression analyses were performed to investigate the association between MMA and risk of PCa. A stratified analysis was also carried out. The dose-response relationship was elucidated by conducting a restricted cubic spline function. RESULTS: A total of 2451 participants were included, of which 95 were PCa participants. The fully-adjusted model 2 constructed by weighted multivariable logistic regression analysis showed that the risk of PCa decreased by 53% when every MMA unit was added [OR: 0.47 (0.22-1.00), P = 0.049]. And a decrease in PCa risk was associated with a higher MMA level in MMA subgroups [OR: 0.34 (0.15-0.82), P = 0.02]. The results from a stratified analysis showed that participants in subgroups of other race, BMI (> 30 kg/m2), smoking (former and now), and hypertension (yes), an increase in every MMA unit was linked to a decrease in PCa risk. MMA and the risk of PCa were negatively correlated in a linear manner. CONCLUSION: It was discovered in the study that an increase in MMA level is connected to a decrease in PCa risk. The serum MMA level may be helpful in assessing PCa risk.

Engineering status of protein for improving microbial cell factories.

With the development of metabolic engineering and synthetic biology, microbial cell factories (MCFs) have provided an efficient and sustainable method to synthesize a series of chemicals from renewable feedstocks. However, the efficiency of MCFs is usually limited by the inappropriate status of protein. Thus, engineering status of protein is essential to achieve efficient bioproduction with high titer, yield and productivity. In this review, we summarize the engineering strategies for metabolic protein status, including protein engineering for boosting microbial catalytic efficiency, protein modification for regulating microbial metabolic capacity, and protein assembly for enhancing microbial synthetic capacity. Finally, we highlight future challenges and prospects of improving microbial cell factories by engineering status of protein.

Relationship between oxidative balance score and kidney stone prevalence in US adults.

BACKGROUND: The aim of the study was to assess the relationship between prevalence of kidney stones (KS) and the oxidative balance score (OBS). METHODS AND MATERIALS: Participants who participated in the KS questionnaire was extracted from the National Health and Nutrition Examination Survey (NHANES) from 2007 to 2018. A series of covariates were also obtained. Weighted adjusted logistic regression was performed to investigate the association of KS with OBS. Dose-response relationship between KS and OBS was assessed by restricted cubic spline. RESULTS: In the fully adjusted model, we discovered that the risk of KS decreased by 3% with each OBS unit raised (OR = 0.97, 95% CI: 0.95-0.99, P = 0.01). In the OBS subgroups, in contrast to the lowest quartile OBS, the higher quartile OBS was correlated to the decreased risk of KS prevalence (Q3 vs Q1: OR = 0.7, 95% CI: 0.49-0.99, P = 0.04; Q4 vs Q1: OR = 0.66, 95% CI: 0.44-0.99, P = 0.04), and the results maintained relative stability across three models. We also found that the risk of population with KS was negatively linked with each unit increase in dietary OBS (OR = 0.97, 95% CI: 0.95-0.99, P = 0.005). Finally, we detected that there was a linear association between OBS and the risk of KS prevalence (P non-linear > 0.05). CONCLUSION: The study discovered that OBS that comprehensively reflects an individual's overall burden of oxidative stress was negatively related to the risk of KS, and can be utilized as an important indicator for assessing the risk of KS.

Reprogramming Metabolic Flux in Escherichia Coli to Enhance Chondroitin Production.

Reprogramming metabolic flux is a promising approach for constructing efficient microbial cell factories (MCFs) to produce chemicals. However, how to boost the transmission efficiency of metabolic flux is still challenging in complex metabolic pathways. In this study, metabolic flux is systematically reprogrammed by regulating flux size, flux direction, and flux rate to build an efficient MCF for chondroitin production. The ammoniation pool for UDP-GalNAc synthesis and the carbonization pool for UDP-GlcA synthesis are first enlarged to increase flux size for providing enough precursors for chondroitin biosynthesis. Then, the ammoniation pool and the carbonization pool are rematched using molecular valves to shift flux direction from cell growth to chondroitin biosynthesis. Next, the adaptability of polymerization pool with the ammoniation and carbonization pools is fine-tuned by dynamic and static valve-based adapters to accelerate flux rate for polymerizing UDP-GalNAc and UDP-GlcA to produce chondroitin. Finally, the engineered strain E. coli F51 is able to produce 9.2 g L-1 chondroitin in a 5-L bioreactor. This strategy shown here provides a systematical approach for regulating metabolic flux in complex metabolic pathways for efficient biosynthesis of chemicals.

Association between novel anthropometric indices and prevalence of kidney stones in US adults.

BACKGROUND: Our aim is to evaluate the relationship between prevalence of kidney stones (KS) and novel anthropometric indices (AHIs). METHODS: Participants who participated in the KS questionnaire was extracted from the National Health and Nutrition Examination Survey (NHANES) from 2007 to 2018.A series of covariates were also obtained. The novel AHIs include a body shape index (ABSI) and body roundness index (BRI). Weighted multivariable-adjusted logistic regression was performed to investigate the association of KS with AHIs. RESULTS: After relative covariates were adjusted, a greater risk of KS for each z score increase in ABSI (OR = 1.13, 95%CI 1.05-1.22), and the risk of KS augmented by 19% for every 1 BRI z score added (OR = 1.19, 95%CI 1.11-1.27). The results from subgroup analysis showed that among adults aged 20-39 (OR = 1.31, 95%CI 1.04-1.65), male (OR = 1.14, 95%CI 1.02-1.28), the risk of KS is higher with the increase of each ABSI z score. Raising each BRI z score in those who were male aged 20-39 and 40-59 resulted in a higher risk of KS (aged 20-39: OR = 1.34, 95%CI 1.06-1.69; aged 40-59: OR = 1.29, 95%CI 1.09-1.53). In female aged 40-59, increasing each BRI z score led to a higher risk of KS (OR = 1.23, 95%CI 1.07-1.41). A linear association of ABSI z score with the risk of KS and a non-linear relationship between BRI z score and the risk of KS were discovered. CONCLUSION: This study found that the novel AHIs was related to the risk of kidney stones, and can be used as important indicators to evaluate the risk of KS.

[Advances in enzymatic production of L-homophenylalanine].

L-homophenylalanine (L-HPA) is an important non-natural amino acid that has been used as a key intermediate for the synthesis of Puli drugs for the treatment of hypertension. At present, L-HPA is synthesized using chemical methods, which has the disadvantages of expensive raw materials, tedious steps and serious pollution. Therefore, researchers have conducted in-depth research on the enzymatic production of L-HPA. This review summarizes the research progress on the enzymatic synthesis of L-HPA, including the dehydrogenase process, the transaminase process, the hydantoinase process, and the decarboxylase process, with the hope to facilitate the industrial production of L-HPA.

[Regulation of intracellular level of ATP and NADH in Escherichia coli to promote succinic acid production].

Succinic acid is an important C4 platform chemical that is widely used in food, chemical, medicine sectors. The bottleneck of fermentative production of succinic acid by engineered Escherichia coli is the imbalance of intracellular cofactors, which often leads to accumulation of by-products, lower yield and low productivity. Stoichiometric analysis indicated that an efficient production of succinic acid by E. coli FMME-N-26 under micro-aeration conditions might be achieved when the TCA cycle provides enough ATP and NADH for the r-TCA pathway. In order to promote succinic acid production, a serial of metabolic engineering strategies include reducing ATP consumption, strengthening ATP synthesis, blocking NADH competitive pathway and constructing NADH complementary pathway were developed. As result, an engineered E. coli FW-17 capable of producing 139.52 g/L succinic acid and 1.40 g/L acetic acid in 5 L fermenter, which were 17.81% higher and 67.59% lower than that of the control strain, was developed. Further scale-up experiments were carried out in a 1 000 L fermenter, and the titer of succinic acid and acetic acid were 140.2 g/L and 1.38 g/L, respectively.

[Modular engineering of Escherichia coli for high-level production of l-tryptophan].

As an essential amino acid, l-tryptophan is widely used in food, feed and medicine sectors. Nowadays, microbial l-tryptophan production suffers from low productivity and yield. Here we construct a chassis E. coli TRP3 producing 11.80 g/L l-tryptophan, which was generated by knocking out the l-tryptophan operon repressor protein (trpR) and the l-tryptophan attenuator (trpL), and introducing the feedback-resistant mutant aroGfbr. On this basis, the l-tryptophan biosynthesis pathway was divided into three modules, including the central metabolic pathway module, the shikimic acid pathway to chorismate module and the chorismate to tryptophan module. Then we used promoter engineering approach to balance the three modules and obtained an engineered E. coli TRP9. After fed-batch cultures in a 5 L fermentor, tryptophan titer reached to 36.08 g/L, with a yield of 18.55%, which reached 81.7% of the maximum theoretical yield. The tryptophan producing strain with high yield laid a good foundation for large-scale production of tryptophan.

[Metabolic engineering of Escherichia coli for adipic acid production].

Adipic acid is a high-value-added dicarboxylic acid which is primarily used in the production of nylon-66 for manufacturing polyurethane foam and polyester resins. At present, the biosynthesis of adipic acid is hampered by its low production efficiency. By introducing the key enzymes of adipic acid reverse degradation pathway into a succinic acid overproducing strain Escherichia coli FMME N-2, an engineered E. coli JL00 capable of producing 0.34 g/L adipic acid was constructed. Subsequently, the expression level of the rate-limiting enzyme was optimized and the adipic acid titer in shake-flask fermentation increased to 0.87 g/L. Moreover, the supply of precursors was balanced by a combinatorial strategy consisting of deletion of sucD, over-expression of acs, and mutation of lpd, and the adipic acid titer of the resulting E. coli JL12 increased to 1.51 g/L. Finally, the fermentation process was optimized in a 5 L fermenter. After 72 h fed-batch fermentation, adipic acid titer reached 22.3 g/L with a yield of 0.25 g/g and a productivity of 0.31 g/(L·h). This work may serve as a technical reference for the biosynthesis of various dicarboxylic acids.

Functional characterization, structural basis, and regio-selectivity control of a promiscuous flavonoid 7,4'-di-O-glycosyltransferase from Ziziphus jujuba var. spinosa.

A highly efficient and promiscuous 7,4'-di-O-glycosyltransferase ZjOGT3 was discovered from the medicinal plant Ziziphus jujuba var. spinosa. ZjOGT3 could sequentially catalyse 4'- and 7-O-glycosylation of flavones to produce 7,4'-di-O-glycosides with obvious regio-selectivity. For 7,4'-dihydroxyl flavanones and 3-O-glycosylated 7,4'-dihydroxyl flavones, ZjOGT3 selectively catalyses 7-O-glycosylation. The crystal structure of ZjOGT3 was solved. Structural analysis, DFT calculations, MD simulations, and site-directed mutagenesis reveal that the regio-selectivity is mainly controlled by the enzyme microenvironment for 7,4'-dihydroxyl flavones and 3-O-glycosylated 7,4'-dihydroxyl flavones. For 7,4'-dihydroxyl flavanones, the selectivity is mainly controlled by intrinsic reactivity. ZjOGT3 is the first plant flavonoid 7,4'-di-O-glycosyltransferase with a crystal structure. This work could help understand the catalytic mechanisms of multi-site glycosyltransferases and provides an efficient approach to synthesise O-glycosides with medicinal potential.

Improving Theaflavin-3,3'-digallate Production Efficiency Optimization by Transition State Conformation of Polyphenol Oxidase.

Theaflavins (TFs) are good for health because of their bioactivities. Enzymatic synthesis of TFs has garnered much attention; however, the source and activity of the enzymes needed limit their wide application. In this study, a microbial polyphenol oxidase from Bacillus megaterium was screened for the synthesis of theaflavin-3,3'-digallate (TFDG). Based on structural and mechanistic analyses of the enzyme, the O-O bond dissociation was identified as the rate-determining step. To address this issue, a transition state (TS) conformation optimization strategy was adopted to stabilize the spatial conformation of the O-O bond dissociation, which improved the catalytic efficiency of tyrosinase. Under the optimum transformation conditions of pH 4.0, temperature 25 °C, (-)-epigallocatechin gallate/epicatechin gallate molar ratio of 2:1, and time of 30 min, Mu4 (BmTyrV218A/R209S) produced 960.36 mg/L TFDG with a 44.22% conversion rate, which was 6.35-fold higher than that of the wild type. Thus, the method established has great potential in the synthesis of TFDG and other TFs.

Protein engineering, cofactor engineering, and surface display engineering to achieve whole-cell catalytic production of chondroitin sulfate A.

Chondroitin sulfate A (CSA) is a valuable glycosaminoglycan that has great market demand. However, current synthetic methods are limited by requiring the expensive sulfate group donor 3'-phosphoadenosine-5'-phosphosulfate (PAPS) and inefficient enzyme carbohydrate sulfotransferase 11 (CHST11). Herein, we report the design and integration of the PAPS synthesis and sulfotransferase pathways to realize whole-cell catalytic production of CSA. Using mechanism-based protein engineering, we improved the thermostability and catalytic efficiency of CHST11; its Tm and half-life increased by 6.9°C and 3.5 h, respectively, and its specific activity increased 2.1-fold. Via cofactor engineering, we designed a dual-cycle strategy of regenerating ATP and PAPS to increase the supply of PAPS. Through surface display engineering, we realized the outer membrane expression of CHST11 and constructed a whole-cell catalytic system of CSA production with an 89.5% conversion rate. This whole-cell catalytic process provides a promising method for the industrial production of CSA.